• Your shopping cart is empty!

9-10K, #13G General Duty Hubs

9-10K, #13G General Duty Hubs



STANDARD LUBE PARTS
Item

Part No.

 Description
1 57-10-51 Oil Seal Unitized 2.875 ID,  3.880 OD
2 58-387A Inner Bearing Cone
3 58-382A Inner Bearing Cup
4 58-25520 Outer Bearing Cup
5 58-25580 Outer Bearing Cone
6 59-006-096-00 Spindle Nut
7 59-005-070-00 Spindle Washer
8 59-5-71 Tang Washer
9 55-21-88 Oil Cap
10 55-010-163 "O" Ring
12 55-46-32 Oil Cap Plug
14 56-007-292-00 Drum Mounting Screw
15 007-116-00 Brake Mounting Bolt
16 006-017-00 Brake Mounting Nut
 
BRAKES
Item Part No. Description
20 74-023-450 LH 12.25" x 3.375" Electric, FSA 
20 74-023-451 RH 12.25" x 3.375" Electric, FSA 
21 71-23-410 LH 12.25" x 3.375" Hydraulic, FSA, Duo-Servo
21 71-23-411 RH 12.25" x 3.375" Hydraulic, FSA, Duo-Servo

ABS Components
24 097-004-00 Sensor, Straight
25 024-204-00 Sensor Block
26 097-002-00 Sensor Clip
27 024-205-00 Tone Ring

 

HUBS
Item Part No. Description
Hubs and Drums 2 Piece after April 2013 
22 54-008-430-03 Oil Hub w/Cups and Studs
23 54-009-123-01 Drum Machined
Hubs and Drums 1 Piece After July 2009
23 54-008-430-05 Oil Hub & Drum w/cups & studs
Hubs and Drums 2 Piece before July 2009
22 54-008-288-03 Oil Hub w/Cups and Studs
23 54-009-044-01 Drum Machined

 

STUDS AND WHEEL NUTS
Item Part No. Description
13 56-007-115-00 5/8-18 Press-in Stud
17 56-006-058-00 5/8-18 Flange Nut (torque 300 lbs.-ft)
18 56-006-109-00 5/8-18 90 degree Cone Nut (torque 200 lbs.-ft) Use with Clamp Ring
19 56-033-052-01 Clamp Ring

*Must use the 90 degree cone nut with the clamp ring.  Alternate fastener is just the flange nut.

There are no products to list in this category.

Continue