5200 lb Axle

5200  lb Axle

OPTIONS


Pre-wired or Pre-wired sealed harness
Brake Flange optional on idler axle
Spring length & capacity

SPECIFICATIONS


  Axle Tube:    .250 Wall Thickness x 3" OD Round Tube
  Spindles:       Straight or 4" Drop, 1.75" & 1.25"
  Bearings:       25580 inner, 15123 outer (LM67048 prior 1996)
  Seal:                2.250" ID (2.125" ID before Summer 2019)
  Hardware:      U-bolts, Tie Plates and fasteners included with axle beam
  Lubrication:   E-Z Lube option
  Brake Flange:  5 hole UT axle - standard

HUBS


  Idler 6 stud on 5.5" bolt center (see Hub page)
  12" Hub & Drum 6 Stud on 5.5" bolt center (see Hub page)

BRAKES


  Brake Flange only, 5 hole UT axle - standard on bare beam
  Electric 12" x 2"  (see Electric Brake page)
  Hydraulic 12" x 2" uni-servo Free Backing  (see Hydraulic Brake page)
  Hydraulic Disc Brakes  (see Disc Brake page)

SUSPENSION

SPRINGS

Leaf Capacity Each Type Length Width Standard/ Option Bushing

31-72-26

 4  3000 lb. D.E. 25.13" 1.75" Standard 9/16"

31-17-64

 5  2950 lb. D.E. 25.13" 1.75" Optional 9/16"

31-1203T3-N

 5  3500 lb. Slipper 25.56" 2" Standard 9/16"
 

SUSPENSION HARDWARE

No. of Axles Capacity Type

Width

30-35SADEKIT

 Single   2-7000 lb. Double Eye

1.75"

30-52SASLKIT

 Single   3-5200 lb. Slipper 2"

30-35TADEKIT

 Tandem   2-7000 lb. Double Eye 1.75"

30-52TASLKIT

 Tandem   3-5200 lb. Slipper 2"

30-35TRDEKIT

 Triple   2-7000 lb. Double Eye 1.75"

30-52TRSLKIT

 Triple   3-5200 lb. Slipper 2"

HUB FACE AND SPRING CENTER MEASUREMENTS


DIFFERENCE BETWEEN HUB FACE AND SPRING CENTER
Axle Type Minimum (E x 2) Recommended Maximum Max. Spring Center
Straight  14" 15" 19" 78.5"
Drop 18.5" 18.5" 19" 75"

Note: Maximum Spring Centers may vary with rim size.

Minimums are based on manufacturing tolerances, some wheel and tire combinations may not work.

Maximum capacity- actual capacity may vary depending on springs, options and overhangs.

 




There are no products to list in this category.