RH Ramp Spring 5/8" Dia., 1.425 I.D., Leg 7.5", 9 coils, 0.625 wire (Must buy matching LH)

Bar Size: 1.250"

In-lb./deg: 61.1758

Spec Sheet

Note

• As a load is applied to a torsion spring the spring's diameter will decrease, reducing the inside and outside diameters.  The spring will also grow in length.  Allow 10% clearance between the torsion spring and shaft at maximum deflection.
• The spring should wind in the direction of the coil winding.
• Ramp Torque (in-lb.) = Distance to Center of Gravity (in.) of Ramp  x Ramp Weight (lb.)
• Torsion Spring calculations.