#8 TORFLEX 600-1100 lb Axle
| 
|
| SPECIFICATIONS |
| Spindles: Straight, L44649 Inner/Outerbearing |
| Lubrication: Grease or EZ-Lube |
| Hubs: 5 Stud on 4.5" with 5.5" Hub Flange - for 8" - 12" Wheels (see Hub page) |
|
| BRAKES |
| Electric 7" x 1 1/4" (see Electric Brake page) |
| Hydraulic 7" x 1 3/4" Uni-Servo non free backing (see Hydraulic Brake page) |
|
| OPTIONS |
|
| Hubs: 4 Stud on 4" |
| 5 Stud on 4.5" with 6.5" Hub Flange - for 12" - 15" Wheels |
| Hardware: A/P-165 |
|
| #8 OVERHANG PER SIDE | | Spindle | Min. | Max. | | Short | 4.75" | 9.04" | | Standard | 6.00" | 9.04" | |
|
| SUSPENSION |
- Totally rubber-cushioned for smooth, quiet, independent ride.
- Easy installation with less maintenance.
- Less transfer of road shock which insulates cargo from road shocks and vibration.
- Rubber cords compounded for maximum dependability and durability.
- Load carrying cross member.
- Self-damping action.
- Independent wheel suspension.
- 5 year limited warranty on suspension system.
- Low profile for maximum road clearance.
- Various starting angles to control trailer height.
- High and low profile brackets with optional mounting brackets available.
- Single or Tandem axle assemblies.
- CAUTION: Triple axle assemblies NOT recommended
|
|
| #8 BRACKET DIMENSIONS |
 | | #8 BRACKET DIMENSIONS | | | | Low | | A | 1.00 | | B | 2.38 | | C | 8.00 | | D | 7.75 | | E | 10.00 | | F | 2.88 | | G | 2.00 | | J | 1.57 | | Bolt Size | 1/2" Bolt | | Tube Size | 1.75 | |
|
| #8 ARTICULATION DIMENSIONS |
| Dimensions are for low profile, top mount only. Side mount is .18" higher. Allow 3" bump clearance from full load. |
 | | | No Load | Full Load | Shock Load | Start
Angle | Bracket
Profile | H | L | H | L | H | L | | 45° down | Low | 3.84 | 2.83 | 2.54 | 3.70 | 1.87 | 3.91 | | 22.5° down | Low | 2.54 | 3.70 | 1.01 | 4.00 | 0.31 | 3.94 | | 10° down | Low | 1.70 | 3.94 | 0.14 | 3.91 | -0.52 | 3.70 | | 0° | Low | 1.01 | 4.00 | -0.52 | 3.70 | -1.14 | 3.37 | | 10° up | Low | 0.31 | 3.94 | -1.14 | 3.37 | -1.69 | 2.95 | | 22.5° up | Low | -0.52 | 3.70 | -1.82 | 2.83 | -2.27 | 2.29 | |
| Note: Positive numbers in the H column indicate the spindle is BELOW the top of the bracket. Conversely, negative numbers are ABOVE the top of the bracket |
|
| #8 FULL LOAD DIMENSIONS |
| Dimensions are for low profile, top mount only. Side mount is .18" higher. Allow 3" bump clearance from full load. |
| 
|
| Start Angle | 45° Down | 22.5° Down | 10° Down | 0° | 10° Up | 22.5° Up | | | Tire | H | B | C | H | B | C | H | B | C | H | B | C | H | B | C | H | B | C | D | E | | ST175/80R13 | 2.5 | 13.7 | 9.5 | 1.0 | 12.2 | 11.0 | 0.1 | 11.3 | 11.9 | -0.5 | 10.7 | 12.5 | -1.1 | 10.1 | 13.1 | -1.8 | 9.4 | 13.8 | 11.2 | 12.0 | | 4.80-8 | 2.5 | 10.4 | 6.3 | 1.0 | 8.9 | 7.8 | 0.1 | 8.0 | 8.7 | -0.5 | 7.4 | 9.3 | -1.1 | 6.8 | 9.9 | -1.8 | 6.1 | 10.6 | 7.9 | 8.8 | | 4.80-12 | 2.5 | 12.0 | 8.3 | 1.0 | 10.5 | 9.8 | 0.1 | 9.6 | 10.7 | -0.5 | 9.0 | 11.3 | -1.1 | 8.4 | 11.9 | -1.8 | 7.7 | 12.6 | 9.5 | 10.8 | | 20.5x8.0-10 | 2.5 | 12.2 | 8.3 | 1.0 | 10.7 | 9.8 | 0.1 | 9.8 | 10.7 | -0.5 | 9.2 | 11.3 | -1.1 | 8.6 | 11.9 | -1.8 | 7.9 | 12.6 | 9.7 | 10.8 | |
There are no products to list in this category.
