• Your shopping cart is empty!

#13 Torflex 8000 lb Axle

#13 Torflex 8000 lb Axle

#13 OVERHANG PER SIDE
Spindle Min. Max.
Short 8.50" 21.50"
Standard 9.00" 21.50"

SPECIFICATIONS


  Spindles:       Straight, 25580 Inner / 02475 Outer bearings
  Lubrication:   Grease,  EZ-Lube, Nev-R-Lube or Oil bath
  Hubs:   8 Stud on 6.5”  (9/16” studs) (see Hub page)

BRAKES


  Electric 12 1/4" x 3 3/8" Cast backing plate  (see Electric Brake page)
  Hydraulic 12 1/4" x 3 3/8" Duo-Servo self adjust (see Hydraulic Brake page)
  Hydraulic Disc (see Disc Brake page)

OPTIONS


  Lubrication: Oil Bath, Nev-R-Lube
  Hubs:  Optional 5/8" Studs 
  ABS: For Hydraulic
  Wire: Pre-wire, Braided wire
  Hardware: A/P-169

SUSPENSION


  • Totally rubber-cushioned for smooth, quiet, independent ride.
  • Easy installation with less maintenance.
  • Less transfer of road shock which insulates cargo from road shocks and vibration.
  • Rubber cords compounded for maximum dependability and durability.
  • Load carrying cross member.
  • Self-damping action.
  • Independent wheel suspension.
  • 5 year limited warranty on suspension system.
  • Low profile for maximum road clearance.
  • Various starting angles to control trailer height.
  • High and low profile brackets with optional mounting brackets available.
  • Single or Tandem axle assemblies. 
  • CAUTION: Triple axle assemblies NOT recommended

#13 BRACKET DIMENSIONS


#13 BRACKET DIMENSIONS
  Low High
A 1.22 1.22
B 3.63 3.63
C 10.56 10.56
D 10.56 10.56
E 13.00 13.00
F 4.81 5.50
G 2.50 2.50
J 2.25 2.25
L 7.26 7.26
P --- 1.00
Q --- 1.00
Bolt Size 5/8" Bolt
Tube Size 3.88 3.88


#13 ARTICULATION DIMENSIONS

Dimensions are for top mount only. Side mount is .31" higher. Allow 3" bump clearance from full load.

  No Load Full Load Shock Load
Start
Angle		 Bracket
Profile		 H L H L H L
45° down Low 6.49 4.24 4.55 5.54 3.55 5.86
High 7.18 4.24 5.24 5.54 4.24 5.86
22.5° down Low 4.55 5.54 2.25 6.00 1.21 5.91
High 5.24 5.54 2.94 6.00 1.90 5.91
10° down Low 3.29 5.91 0.95 5.86 -0.05 5.54
High 3.98 5.91 1.64 5.86 0.64 5.54
0° Low 2.25 6.00 -0.05 5.54 -0.97 5.06
High 2.94 6.00 0.64 5.54 -0.28 5.06
10° up Low 1.21 5.91 -0.97 5.06 -1.80 4.42
High 1.90 5.91 -0.28 5.06 -1.11 4.42
22.5° up Low -0.05 5.54 -1.99 4.24 -2.66 3.44
High 0.64 5.54 -1.30 4.24 -1.97 3.44
Note: Positive numbers in the H column indicate the spindle is BELOW the top of the bracket. Conversely, negative numbers are ABOVE the top of the bracket.

#13 FULL LOAD DIMENSIONS


Dimensions are for low profile, top mount only. High profile brackets are .75" higher. Side mount is .31" higher. Allow 3" bump clearance from full load.

#13 FULL LOAD DIMENSIONS


Dimensions are for low profile, top mount only. High profile brackets are .75" higher. Side mount is .31" higher. Allow 3" bump clearance from full load.

Start Angle 45° Down 22.5° Down 10° Down 0° 10° Up 22.5° Up  
Tire H B C H B C H B C H B C H B C H B C D E
10R17.5 HC 4.6 20.2 13.4 2.3 17.9 15.7 1.0 16.6 17.0 -0.1 15.5 18.1 -1.0 14.6 19.0 -2.0 13.6 20.0 15.6 18.0
215/75R 17.5 4.6 18.6 10.7 2.3 16.3 13.0 1.0 15.0 14.3 -0.1 13.9 15.4 -1.0 13.0 16.3 -2.0 12.0 17.3 14.0 15.3
12-16.5 LT 4.6 19.5 11.2 2.3 17.2 13.5 1.0 15.9 14.8 -0.1 14.8 15.9 -1.0 13.9 16.8 -2.0 12.9 17.8 14.9 15.8
9.50-16.5 LT 4.6 18.7 10.6 2.3 16.4 12.9 1.0 15.1 14.2 -0.1 14.0 15.3 -1.0 13.1 16.2 -2.0 12.1 17.2 14.1 15.2
9R 17.5 HC 4.6 20.0 12.5 2.3 17.7 14.8 1.0 16.4 16.1 -0.1 15.3 17.2 -1.0 14.4 18.1 -2.0 13.4 19.1 15.4 17.1

There are no products to list in this category.

Continue