• Your shopping cart is empty!

7200 lb Hubs

7200 lb Hubs

STANDARD LUBE PARTS
Item

Part No.

 Description
1 57-10-36 Grease Seal
1 57-10-63 Oil Seal Unitized 2.25 ID,  3.376 OD
2 58-25580 Inner Bearing Cone
3 58-25520 Inner Bearing Cup
4 58-02420 Outer Bearing Cup - For item 24 & 27
5 58-02475 Outer Bearing Cone - For item 24 & 27
6 59-006-176-00 Spindle Nut
7 59-CP18*2 Cotter Pin
8 55-21-39 Grease Cap
8A 55-21-43-1 7000 lb. Dust Cap EZ-Lube
8B 55-85-1 EZ-Lube Plug
8C 55-21-35 Oil Cap
8D 55-46-32 Oil Cap Plug
9 59-FW3500 Spindle Washer
10 56-007-223-00 9/16" - 18 Press-in Stud
10 56-007-224-00 5/8" - 18 Press-in Stud
12 56-006-053-00 9/16" - 18 60 degree Cone
12 56-006-109-00 5/8" - 18 90 degree Cone
14 55-046-052-00 Rubber Oil Filler Plug
16 55-10-45 Oil Bath "O" Ring
28 59-006-191-00 Special Jam Nut
29 59-006-190-00 Spindle Nut Retainer
 
BRAKES
Item Part No. Description

(manufactured before May 2000 for Stamped Backing Plates)
20 74-23-370 LH 12.25" x 2.5" Electric (Stamped Backing Plate)
20 74-23-369 RH 12.25" x 2.5" Electric (Stamped Backing Plate)

(manufactured after May 2000 for Cast Backing Plates)
20 74-023-428-00 LH 12.25" x 2.5" Electric (Cast Backing Plate)
20 74-023-429-00 RH 12.25" x 2.5" Electric (Cast Backing Plate)
 
HUBS
Item Part No. Description Bolt Circle
(manufactured before May 2000 for Stamped Backing Plates)
24 54-8-355-13 Grease 9/16" Studs 8 on 6.5"
24 54-8-355-15 Grease 5/8" Studs 8 on 6.5"
24 54-8-355-12 Oil 9/16" Studs 8 on 6.5"
24 54-8-355-14 Oil 5/8" Studs 8 on 6.5"
(manufactured after May 2000 for Cast Backing Plates)
24 54-008-393-04 Grease 9/16" Studs 8 on 6.5"
24 54-008-393-06 Grease 5/8" Studs 8 on 6.5"
24 54-008-393-03 Oil 9/16" Studs 8 on 6.5"
24 54-008-393-05 Oil 5/8" Studs 8 on 6.5"

There are no products to list in this category.

Continue