Attractive two piece, outer shroud with inner trim ring, made of UV resistant polypropylene.

• Increase ventilation and prevent the build up of vapor
• Drain holes to let water out
• Slot on far side to prevent water getting in
• Vent can be easily trimmed for thin walls

Dimensions:
Outer shroud 8"x6"x1 1/4"
 Inner trim ring 4 1/8" dia. x 1 5/8" deep, vent tube 2 15/16" dia.

Installation requires 3" dia. hole.  Two vents per trailer recommended (1 high driver side and 1 lower passenger side).  Mounting screws and sealant not included.